Weller WR2 Uživatelský manuál stáhnout pdf (Strana 26)

6-20 WR 2

4.1 Technical data of WR 2

Dimensions L x B x H (mm): 273 x 235 x 102

L x W x H (inches): 10.75 x 9.25 x 4.02

Weight approx. 6.7 kg

Mains supply voltage 230 V, 50 Hz (120 V, 60 Hz)

Power consumption 300 W

Safety class I and III, housing antistatic

Fuse Overcurrent release 1.5 A

Temperature control of

channels

Soldering and desoldering tool,

continuously variable from

50 °C – 550 °C (150 °F – 999 °F)

Controllable temperature range is tool-

dependent

WP 80 / WP 120

50 °C - 450 °C (150 °F - 850 °F)

WP 200

50 °C - 550 °C (150 °F - 950 °F)

WSP 150

50 °C - 550 °C (150 °F - 950 °F)

DSX 80 / DSXV 80

50 °C - 450 °C (150 °F - 850 °F)

HAP 1

50 °C - 550 °C (150 °F - 999 °F)

Temperature accuracy ± 9 °C (± 20 °F)

Temperature accuracy

HAP 1

± 30 °C (± 50 °F)

Temperature stability ± 2 °C (± 5 °F)

Soldering tip leakage

resistance (tip to ground)

corresponds to IPC-J-001

Soldering tip leakage

current (tip to ground)

corresponds to IPC-J-001

Pump (periodic duty

(30/30) s)

Max. vacuum 0.7 bar

Max. delivery rate 10 l/min

Hot air max. 15 l/min

Equipotential bonding Via 3.5 mm pawl socket on back of

device

Equipotential bonding

Due to the different configuration of the 3.5 mm jackplug socket

(equipotential bonding socket) (27),

4 variants are possible:

− Hard earthed/grounded: without connector (delivery status)

− Centre contact.

− Floating: with connector

− Soft earthed: with connector and soldered resistor.

Earthing via the selected resistor

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 64 65

Komentáře k této Příručce

Žádné komentáře

Weller WR2 Uživatelský manuál Strana 26

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Weller WR2